Power Linking; Dmx Linking; Dmx Personalities; Master/Slave Connectivity - Chauvet COLORado 4 IP User Manual

Hide thumbs Also See for COLORado 4 IP:
Table of Contents

Advertisement

Power Linking

DMX Linking

DMX Personalities

Master/Slave
Connectivity
Colorado™ 4 IP User Manual Rev. 5
The COLORado™ 4 IP supports power linking. You can power link up to 5 products at
120 VAC, 9 products at 208 VAC, or 10 products at 230 VAC.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
You can link the COLORado™ 4 IP to a DMX controller using a standard DMX serial
connection. If using other DMX-compatible products with the COLORado™ 4 IP, you can
control each individually with a single DMX controller.
The COLORado™ 4 IP uses the standard DMX data connection for the TOUR, TR16,
ARC.1, AR1.D, ARC.2, AR2.D, AR2.S, HALO, PIX1, PIX2, and HSV DMX personalities.
· Refer to the
Introduction
· Refer to
Operation
to learn how to configure the COLORado™ 4 IP to work in these
modes.
· The
DMX Values
section will provide you with detailed information regarding the DMX
modes.
The Master/Slave mode allows a COLORado™ 4 IP (the master) to control one or more
COLORado™ 4 IPs (the slaves) without a DMX controller. One COLORado™ 4 IP
becomes the master when running an Auto or Custom program, or by being in Static
mode.
You must configure each slave to operate in Slave mode. During Master/Slave
operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The
Operation
section of this manual provides detailed instructions on how to
configure Master and Slaves.
Note: For optimum control of the 16-bit dimming channels in the TR16 personality,
be sure that both dimming curves in SET > DIMX and SET > CURV are set to OFF.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller,
download
www.chauvetprofessional.com.
for a brief description of these modes.
the
DMX
Primer
from
the
Chauvet
Setup
website:
-7-

Advertisement

Table of Contents
loading

Table of Contents