1. B EFORE EGIN What is included 1 x 4BAR™ 1 x 4BAR™ transport bag 1 x Tripod stand 1 x Tripod stand transport bag 1 x Footswitch 1 x Warranty Card 1 x User Manual...
Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET at: 954-929-1115. 4BAR™ User Manual...
Product Overview 5-pin Footswitch Connection Microphone Power In Control Panel Sound Sensitivity Adjustment Knob DMX Out DMX In 4BAR™ User Manual 8/14/2009 9:12 AM...
Maximum recommended number of fixtures on a serial data link: 32 Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-pin adapter. Note! CHAUVET Model No: DMX5M, or DMX5F. The chart below details a proper cable conversion: IN TO...
Sets to sound-active Displays current speed Displays current speed Plays program automatically Displays current speed Displays current speed Change run speed in Change run speed in Allows to change Auto speed ascending order descending order 4BAR™ User Manual 8/14/2009 9:12 AM...
Immediately, press the <UP> button until is displayed (not necessary if already displayed). Wait for 5 seconds. Then, use the <SOUND SENSITIVITY ADJUSTMENT KNOB> to adjustment the sensitivity of the program to the sound received from the microphone. 4BAR™ User Manual 8/14/2009 9:12 AM...
Connect the footswitch to the first 4BAR™. Then, connect from the DMX Out of the Master 4BAR™ to the DMX In of the Slave unit. Set the DMX starting address of the Slave(s) to “...
Connect the footswitch to the 4BAR™ via the 5-pin connection cable with plug. Press pedal # 1 (Preset) to activate control. When this is operating properly, the LEDs on the 4BAR™ will light white (first function on pedal # 1)
power the fixture and it will automatically enter into this mode If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location on the next page. 4BAR™ User Manual 8/14/2009 9:12 AM...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’) 4BAR™...
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET and request RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.