Epson TM-T88V-DT User Manual page 42

TM-DT Settings
Configure the Status Notification settings using EPSON TMNet WebConfig.
1
Connect the TM-DT to the network and turn the power ON.
2
Start EPSON TMNet WebConfig from the shortcut on the desktop.
EPSON TMNet WebConfig starts.
3
Select as [Settings]-[Web service settings]-[Status notification].
The "Status notification" screen appears.
4
Set the following items and click [Apply].
Item
ID
Password
URL
Interval (sec)
42
If you are making settings from an external device, set the TM-DT IP address in the
address for the Web browser. The default IP address for TM-DT is 192.168.192.168.
http://[IP address of the TM-DT]/webconfig/
Set ID for the server-side program to identify TM-DT. This ID becomes the
user ID used for Digest access authentication. The set value will also be
passed as an ID parameter value for the form data posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the previous
communication and the start of the next communication.
Description