Epson TM-T88V-DT User Manual page 25

Server Direct Print Settings
Configure the Server Direct Print settings using EPSON TMNet WebConfig.
1
EPSON TMNet WebConfig starts.
Select as [Settings]-[Web service settings]-[Direct print].
2
The "Server direct print" screen appears.
Set the following items and click [OK].
Item
ID
Password
URL
Intercal (sec)
Registration of TM Printer
Register the device ID and IP address of the controlled TM printer to TM-DT. Use EPSON TMNet WebConfig to
register the device ID. This printer is already registered with the "local_printer" device ID, and therefore this
setting is not required.
Use the following procedure for registration.
1
Connect all TM printers to the network and power on.
2
EPSON TMNet WebConfig starts.
Select as [Settings]-[Web service settings]-[Printer].
3
The "Printer" screen appears.
Set the following items and click [Add].
Item
Device ID
Model no.
IP address
Retry interval (ms)
4
The information of the registered device is displayed in "Registered printers".
Click [Test Print] to check if the registered printer operates properly.
Set ID for the server-side program to identify TM-DT. This ID becomes
the user ID used for Digest access authentication. The set value will
also be passed as an ID parameter value for the form data posted
to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of the Web server]/Test_print.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the
previous communication and the start of the next communication.
Set the ID for the controlled printer. (Any character string)
Select the model for the controlled printer.
Set the printer IP address for each device ID.
Set the timeout retry interval.
Specify "100".
Chapter 2
Description
Description
Sample Program
2
25