Epson TM-T88V-DT User Manual page 23

Registration of TM Printer
Register the device ID and IP address of the controlled TM printer to TM-i. Use EPSON TMNet WebConfig to
register the device ID.
• TM-i printer cannot be deleted from the device.
• The device ID of TM-i printer can be changed.
1
Connect all TM printers to the network and power on.
2
EPSON TMNet WebConfig starts.
For TM-i Firmware Ver.4.0 or later, select [Web Service Settings] - [Direct Print].
For TM-i Firmware Ver.3.x or earlier, select [Configuration] - [Direct Print].
3
The "Printer" / "Device Settings" screen appears.
Set the following items and click [Add] / [Submit].
Item
Device ID
Model
IP Address
Retry Interval (ms)
4
The information of the registered device is displayed.
Click [Test Print] to check if the registered printer operates properly.
Set the ID for the controlled printer. (Any character string)
Select the model for the controlled printer.
Set the printer IP address for each device ID.
Set the timeout retry interval.
Specify "100".
Chapter 2
Description
Sample Program
2
23