Speaker Setup - Kenwood DNR935WBT Instruction Manual

Ñ

Speaker setup

You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
1
Touch [Speaker Select] in the Audio
SETUP screen.
Speaker Select screen appears.
2
Touch the speaker you wish to adjust
and set each item as follows.
Tweeter
You can set the tweeter when you are
selecting front speakers.
None, Small, Middle, Large
X'over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker
type.
Crossover network setup
For details, see
(P.114)
3
Select a speaker size using [C] and [D].
The speaker size is different depending
on the speaker type and the unit.
Front
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Rear
None, OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Subwoofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
NOTE
• Select "None" if you have no speakers.
When Speaker network is set to 3 way.
Region code 3 area
Tweeter
Small, Middle, Large
Mid Range
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Woofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
NOTE
• For how to switch to the 3-way speaker system,
3 way speaker system setup (P.20)
see
in the Quick Start Guide. Connecting 3-way
speakers with the 2-way mode selected can break
the speakers.
• Select "None" if you have no speakers.
Return to the Top page
Controlling Audio
113