Fitting The Solar-Set; Hydraulic Connection (On The Solar Side) - Viessmann VITOCELL 100-U Installation Instructions Manual

Installing the Solar-Set

Fitting the Solar-Set

& Lead the base support for the Solar-
Set with corresponding openings
through both screws and hook in.
&
Insert the third screw at the top of
the cylinder through a suitable slot.

Hydraulic connection (on the solar side)

Note
To join and fit the heating water con-
nections (solar), release the fixing
clamps from the pipework, if required.
8
(cont.)
& Tighten all 3 screws.
& Remove the cardboard transport
packing for securing the pump and
pipes from within the Solar-Set.