Product Information; Vitocell 100-U And 100-W, Type Cvu; Connections - Viessmann VITOCELL 100-U Installation Instructions Manual

Product information

Vitocell 100-U and 100-W, type CVU

Enamelled DHW cylinder with internal
indirect coils for DHW heating in con-
junction with solar heating systems,
freestanding and wall mounted boilers
and/or EHE immersion heater for
dual-mode operation.
& DHW cylinder, fully equipped with
Solar-Set, comprising:
– Solar-Divicon

Connections

A Connection for thermometer sen-
sor
4
– Vitosolic 100
– Pre-assembled pipework
& Content: 300 litres
& Suitable for systems conforming to
DIN 1988, DIN EN 12828, DIN 4753
& DIN registration number: Applied for
& Vitocell 100-W: in white, otherwise
identical
B Magnesium anode with earth
cable
C Heating water return, solar (lower
indirect coil)
D Hot water to the pipework
E Heating water flow, solar (lower
indirect coil)
F Sensor well for cylinder tempera-
ture control
G Heating water flow, boiler (upper
indirect coil)
H DHW circulation
K Heating water return, boiler
(upper indirect coil)
L Cold water/drain
M Heating water return, solar (lower
indirect coil)/sensor well for cylin-
der temperature sensor, solar
N Sensor well for lower thermometer
O Heating water flow, solar (lower
indirect coil)
P Female connection for immersion
heater