Service Journal; Pre-Delivery Service - Husqvarna Rider Operator's Manual

Pre-delivery service

1 Fit steering wheel, seat and any optional equipment.
2 Check and adjust tyre pressure. (60 kPa, 0.6 bar, 9 psi).
3 Adjust cutting unit:
Adjust cutting unit so that rear edge is about 5-7 mm / (1/5-1/4") higher than front edge.
4 Check the acid level in the batteries and top up with distilled water if necessary.
5 Connect battery.
6 Charge the battery using the battery charger supplied. See the "Charging the batteries" section.
7 Start the machine and check that it does not move in neutral.
8 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
Safety switch for parking brake.
The safety switch for the cutting deck
9 Tell customer about:
Needs and benefits of following the service schedule.
Servicing and the influence of this journal on the second-hand value of the machine.
Range of applications for BioClip function.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certified:
Date:
Mileage:
Signature:
Label:

Service journal

– 5
English