Key To Symbols; Symbols; Explanation Of Warning Levels - Husqvarna Rider Operator's Manual

Symbols

These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Use hearing protection
This product is in accordance with
applicable EC directives.
Reverse
Neutral
Fast
Slow
Cutting height
Backwards
Forwards
Warning: rotating parts. Keep hands and
feet clear.
Clutch in
Clutch out
Parking brake
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
2 –
English

KEY TO SYMBOLS

Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
Before and during reversing procedures,
look behind you.
Remove the ignition key before carrying
out repair work or maintenance.
Explanation of warning
levels
The warnings are graded in three levels.
WARNING!
IMPORTANT!
IMPORTANT! Used if there is a risk of injury to the operator
or damage to the surroundings if the instructions in the
manual are not followed.
CAUTION!
CAUTION! Used if there is a risk of damage to materials or
the machine if the instructions in the manual are not
followed.
WARNING! Used if there is a risk of serious
!
injury or death for the operator or damage to
the surroundings if the instructions in the
manual are not followed.
>10