Motion Detection Setting; Alarm Mode Setting - Aztech WIPC409HD User Manual

WIPC409HD IP CAMERA USER MANUAL

7.3.2 Motion Detection Setting

Allows you to monitor movements made on the monitored area. Four area frames
can be enabled/disabled, managed, resized, and distributed across the monitored
area window. Movements detected within each window would be able to trigger an
alarm. Detection sensitivity settings for each corresponding area window can also be
configured in this area.

7.3.3 Alarm Mode Setting

Allows you to set how the IP Camera will respond when the alarm is triggered. You
can set it to any of the responses enumerated below.
Snapshot a live picture of the site on the SD card.

Record a 30-second video on the SD card (including 5 seconds long video

before the alarm was triggered).
Send the recorded video on the SD card to the FTP server (You would have to

enable "Save the video on SD card" function, and ensure that an SD card is
inserted first).
Enable external alarm function and set the time.

Send alarm info to the alarm server.

Send alarm info to E-mail.

22