Third Party Domain Name; Other Settings; Video Setting Page; Video Setting - Aztech WIPC409HD User Manual

WIPC409HD IP CAMERA USER MANUAL
If the device can be visited by IP address but can't be visited by
manufacturer's domain name, please check the DNS info if it is available or
not and make sure that the DNS setting is the same with the DNS setting of
PC in LAN.

6.2.2 Third Party Domain Name

You may also use third party DDNS, such as www.3322.org. You may apply for a free
domain name from this website. All you have to do is to correctly enter the
information required, and the domain name can now be used.
The domain name will be displayed in the web browser all the time
whenever you are visiting the IP Camera. However, if the port is not 80, the
port number should be added to the domain name with colon. Example:
http://ipcam.3322.org:81

7 Other Settings

7.1 Video Setting Page

7.1.1 Video Setting

Resolution
Use 1280 X 720 Resolution, Bit Rate is 2048 kbps and Frame Rate is up to 30 fps. The
higher the resolution or quality of the picture, the higher bit rate requirement and
bandwidth consumption will be. A high bit rate allows the generation of higher
image qualities.
Please take note that in setting the frame rate, bandwidth must be taken into
consideration. With a low bandwidth, a high frame rate would result into uneven
18