HP Pavilion Maintenance And Service Manual page 44

4. Remove the six Phillips PM2.5×6.5 screws from near the battery bay (2).
5. Position the computer upside down.
CAUTION:
computer is upside-down when removing the bottom cover.
6. Remove the two screw covers (1) and nine Phillips PM2.5×6.5 screws (2) that secure the top cover to
the computer.
7. Use a non-marking tool (3) to disengage the bottom cover from the computer. You will have work
around the seams on all sides of the computer.
CAUTION:
8. Remove the bottom cover (4).
Reverse this procedure to install the bottom cover.
36 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To avoid the hard drive falling out of the computer and getting damaged, be sure the
To avoid damaging the cover, do not pry the cover near the optical drive bay.