Aux Setting; Setting The Aux Mode; Setting The Primary Aux Name (Aux Setup); Setting The Aux3 - Alpine X009E Owner's Manual

AUX Setting

[Aux] is selected on the Source setup menu in step 3. Refer to "Source
Setup Operation" (page 48).

Setting the AUX Mode

Setting item: AUX In
Setting contents: Off / On (Initial setting)
AUX source is not displayed.
Off:
On: AUX source is displayed.
Setting the Primary AUX Name
(AUX Setup)
When AUX In is set to "ON", this setting is available.
Setting item: Primary Name
Setting contents: AUX1 (Initial setting) / DVD / GAME / EXT.DVD /
DVD-CHG / DVB-T / TV
• When a DVB-T tuner is connected, you can use it to connect one
more External Input device. Setting the Secondary name can change
the mode name display of this device.
Setting the Secondary AUX Name
Secondary name can be set only when Primary name is set to "DVB-T".
Setting item: Secondary Name
Setting contents: OFF (Initial setting) / AUX2 / DVD / GAME /
EXT.DVD / DVD-CHG / DVB-T* / TV
• The selected source name is displayed instead of Auxiliary (AUX)
mode name.
* If the Primary Name is DVB-T, DVB-T is not displayed as a
Secondary Name option.
Switching the Visual Input Signal System
After setting to "On" in "Setting the AUX Mode", this setting can be
carried out. The video input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.

Setting the AUX3

Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable
(4-pole mini AV plug to 3-RCA).
Setting item: AUX3 In Sel.
Setting contents: iPod Video (Initial setting) / AUX3
iPod Video: Set when connected to an iPod or iPhone.
AUX3: Set when connected to an external input device.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
• Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
• When an iPod video is selected or the current source is AUX3, this
setting cannot be adjusted.
Setting the AUX3 Sel. (Switching the Visual
Input Signal System)
After setting to "AUX3" in "Setting the AUX3 In Sel.", this setting can
be carried out. The video input type can be changed.
Setting item: AUX3 Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
• When the current source is AUX3, this setting cannot be adjusted.

RSE Setting

[RSE] is selected on the Source setup menu in step 3. Refer to "Source
Setup Operation" (page 48).
Setting the Rear Seat Entertainment
System
Video and audio can be output to the rear monitor.
Setting item: RSE
Setting contents: Off (Initial setting) / On
• If you selected the "On" setting, set the "Remote Sensor Setting"
(page 39).
51
-EN