On-Road Navigation; Selecting The Destination Of A Route - Alpine X009E Owner's Manual

3 On-road navigation

When first started, Alpine X009E calculates routes using the road network
of the high quality vector maps provided with the product.
You can set up your route in different ways:
 If you need a route for immediate navigation, you can select the
destination and start navigating to it right away (normal navigation).
 You can also plan a route independently of your current GPS
position or even without GPS reception (to achieve this, you need to
turn off the GPS receiver and set a new starting point in Route / Edit
Route by tapping the flag icon at the current position).
You can plan routes with multiple destinations. Select the first destination.
Then select a second destination and add it to your route to create a multi-
point route. You can add as many destinations to your route as you like.
You can also use Alpine X009E for off-road navigation. For details, see
page 80.

3.1 Selecting the destination of a route

The software offers you several ways of choosing your destination:
Enter a full address or a part of an address, for example a street

name without a house number or the names of two intersecting
streets (page 30).
 Enter an address with postal code (page 40). This way you do not
need to select the name of the city/town and the search for street
names might be faster as well.
 Use a built-in Place of Interest as your destination (page 44).
 Use the free form search to find an address or Place (page 57).
 Select a location on the map with the Find on Map feature (page 58).
 Use a previously saved Address Book entry (page 59).
 Select a location from the History of previously used destinations
(page 61).
 Enter the coordinate of the destination (page 62).
 Use the location where a photo was taken (page 63).
29