Clarion FZ409E Owner's Manual page 32

Common Operations
Notes:
This unit requires hands-free kit that supports
[ AUX ] input as a source of cellular phone audio
input. Please consult your local authorized Clarion
dealer for more information on the hands free kit
offered.
If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio through
the system.
When listening to your calls on your car speakers,
you can adjust the volume.
The factory default setting for this volume is "VOL
15".
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone rings
in the car.
This function is not compatible with all cellular
telephones. Please contact your local authorized
Clarion dealer for information on proper installation
and compatibility.
Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
Select "SYSTEM CHECK".
3 - 1 .
Touch [ ENT ] key. "SYSTEM CHECK" ap-
3 - 2 .
pears in the display.
After finish checking, this unit will switch to
3 - 3 .
previous mode.
AUX function
This system has an external input jack on the
rear panel so you can listen to sounds and music
from external devices connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗ The factory default setting is "MID".
32
Downloaded from Caradio-Manual.com Manuals
FZ409E
1. During AUX mode, touch the [
to ADJ menu.
2. Select OPTION in the menu to enter AUX OP-
TION mode.
3. Select "AUX SENSE" and touch [
enter detail setting stage.
4. Slide along [ ] slider or touch [
to select "HIGH", "MID" or "LOW".
Note:
When AUX mode is selected, AUX IN sensitivity
can be set.
] key to switch
] key to
] / [ ] key