Table of Contents
Advertisement
7 . Step 3 - VoIP provider
8. Step 4 - VoIP customer data
18
Select or deselect the checkbox Use Group Answer Machines in or-
der to activate or deactivate the group answer machine for individual
call groups/MSNs. For more information on how to configure group
functions, see Administrationsanleitung
A group mailbox is automatically configured with the setup de-
scribed in the example and incoming calls to this mailbox are
signaled at the telephone by a suitably programmed function
key.
Without this function key on the telephone, calls may be lost.
For further information on programming function keys, see .
Group mailbox numbers:
•
ISDN group mailboxes: 50-69
•
SIP group mailboxes: 70-79
External dial-in and Add external call destination are not required
for initial configuration and can be added later, see Administratoranlei-
tung.
You can use + > and < - to scroll to other MSN columns.
Click Next .
Default VoIP data is automatically preset here when you select an In-
ternet telephony provider. If your provider does not appear on the list,
select add new Provider and enter the data manually. The number of
entries required will vary according to the provider. For information on
data for various providers, siehe Administrationsanleitung.
Only the user ID of the selected ITSP is active.
NAT Traversal (STUN) lets you operate your HiPath BizIP behind an
external router.
If necessary, select
the Port. Your network provider can supply the necessary data. See
also Administratorhandbuch.
Click Next .
Enter the required VoIP customer data here for your Internet telephony
provider.
Click Edit (up to 10 entries). If applicable, you will find this data in the
configuration table, see
data for various providers, siehe Administrationsanleitung.
STUN and enter the Provider Registrar and
"Configuration table"
9. For information on
Advertisement
Table of Contents
