54 GETTING TO KNOW YOUR VEHICLE
Locking/Unlocking From The Inside
Push the LOCK button on the driver or passenger door
trim panel to lock the doors.
With the doors locked, push the UNLOCK button to
unlock the doors.
Power Lock/Unlock Switch
The doors can also be locked and unlocked with the
Keyless
Enter-N-Go™
equipped. For further information, refer to "Keyless
Enter-N-Go™" in "Getting To Know Your Vehicle."
If you push the power door lock switch while the ignition
is in the MAR/RUN position, and any front door is open,
the power locks will not operate. This prevents you from
accidentally locking the key in the vehicle. Placing the
ignition in the STOP/OFF position or closing the door
will allow the locks to operate. If a door is open, and the
ignition is in the MAR/RUN position, a chime will sound
as a reminder to remove the key.
NOTE: If all of the doors are closed properly, the door
locks will lock automatically when the vehicle's speed
exceeds 12 mph (20 km/h). Refer to "Uconnect® Set-
tings" in "Multimedia" for further information.
(Passive
Entry)
system
if