Fiat 2016 500X Owner's Manual page 559

• Front ParkSense® Volume — If Equipped
Front Park Assist chime volume settings can be selected
from the EVIC or Uconnect® System (if equipped). The
chime volume settings include "LOW," "MEDIUM," and
"HIGH." The factory default volume setting is MEDIUM.
• Blind Spot Alert — If Equipped
When this feature is selected, the Blind Spot Alert feature
can be set to Off, Lights or Lights and Chime. The Blind Spot
Alert feature can be activated in Lights mode. When this
mode is selected, the Blind Spot Monitor (BSM) system is
activated and will only show a visual alert in the outside
mirrors. When Lights & Chime mode is activated, the Blind
Spot Monitor (BSM) will show a visual alert in the outside
mirrors as well as an audible alert when the turn signal is on.
When Off is selected, the Blind Spot Monitor (BSM) system
is deactivated. To change the Blind Spot Alert status, press
the "Blind Spot Alert" button and select from "Off," "Lights"
or "Lights & Chimes." Then press the back arrow/Done
button on the touchscreen.
NOTE: If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. A sensor that is misaligned will result in the
BSM not operating to specification.
MULTIMEDIA 557
11