Fiat 2016 500X Owner's Manual page 557

time. To change the setting for a more dynamic driving
experience, select the Near setting. This warns you of a
possible collision when you are much closer to the
vehicle in front of you. To change the FCW+ status, press
the "Fwd Collision Warning" button and select the
"Near", "Medium" or "Far" button. Press the back
arrow/Done button on the touchscreen to return to the
previous menu.
• Forward Collision Warning-Plus (FCW+) Active
Braking — If Equipped
The FCW+ system includes Advanced Brake Assist
(ABA). When this feature is selected, it will apply the
brakes to slow your vehicle in case of potential forward
collision. The ABA applies additional brake pressure
when the driver requests insufficient brake pressure to
avoid a potential frontal collision. The ABA system
becomes active at 5 mph (8 km/h). To change the Active
Braking status, press the "Active Braking" button and
select from the following three options: "Off," "Audio,"
"Audio & Brake." Press the back arrow/Done button on
the touchscreen to return to the previous menu.
For further information, refer to "Forward Collision
Warning-Plus (FCW+) With Mitigation" in "Safety."
• LaneSense Warning — If Equipped
When this feature is selected, it sets the distance at which
the steering wheel will provide feedback for potential
lane departures. The LDW sensitivity can be set to
provide either an "early," "medium," or "late" warning
zone start point. To change the LaneSense Warning
status, press the "LaneSense Warning" button and select
from the "Early," "Med," or "Late" buttons. Press the
back arrow/Done button on the touchscreen to return to
the previous menu.
For further information, refer to "LaneSense Warning
(LDW)" in "Starting And Operating."
MULTIMEDIA 555
11