Fiat 2016 500X Owner's Manual page 211

ESC uses sensors in the vehicle to determine the vehicle
path intended by the driver and compares it to the actual
path of the vehicle. When the actual path does not match
the intended path, ESC applies the brake of the appro-
priate wheel to assist in counteracting the oversteer or
understeer condition.
• Oversteer - when the vehicle is turning more than
appropriate for the steering wheel position.
• Understeer - when the vehicle is turning less than
appropriate for the steering wheel position.
The "ESC Activation/Malfunction Indicator Light" lo-
cated in the instrument cluster will start to flash as soon
as the ESC system becomes active. The "ESC Activation/
Malfunction Indicator Light" also flashes when the TCS
is active. If the "ESC Activation/Malfunction Indicator
Light" begins to flash during acceleration, ease up on the
accelerator and apply as little throttle as possible. Be sure
to adapt your speed and driving to the prevailing road
conditions.
WARNING!
When in "Partial Off" mode, the TCS functionality of
ESC, (except for the limited slip feature described in
the TCS section), has been disabled and the "ESC Off
Indicator Light" will be illuminated. When in "Par-
tial Off" mode, the engine power reduction feature of
TCS is disabled, and the enhanced vehicle stability
offered by the ESC system is reduced.
SAFETY 209
6