Making Coffee; Selecting The Coffee Taste; Selecting The Quantity Of Coffee In The Cup; Customising The "My Coffee" Quantity - DèLonghi ECAM45.760 Instructions For Use Manual

MAKING COFFEE

Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste. You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
tedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
button (fig. 12) until the message corresponding to the required
quantity of coffee is displayed:
Coffee selected
MY COFFEE
SHORT
STANDARD
LONG
EXTRA LONG COFFEE

Customising the "my coffee" quantity

The appliance is set by default to automatically deliver 30 ml of
"MY COFFEE". To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (fig. 13).
2. Press the button (fig. 12) until "MY COFFEE" is
displayed.
3. Keep the button (fig. 17) pressed until the message
"1 MY COFFEE Program quantity" is displayed and coffee
delivery begins. Release the button.
4. As soon as the coffee in the cup reaches the required level,
press the button (fig. 17) again.
The quantity of coffee in the cup set has now been programmed.
The programmed quantity is doubled for the

Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and with not enough 'crema' or delivery
is too slow (a drop at a time) and the coffee is very strong, this
can be corrected by adjusting the grinding adjustment dial (fig.
14).
button (fig. 11) repea-
Quantity in cup (ml)
Programmable:
from ≃20 to ≃180
≃40
≃60
≃90
≃120
button.
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
be delivered a drop at a time). These adjustments will only be
evident after at least 2 cups of coffee have been delivered. If
this adjustment does not obtain the desired result, turn the dial
another click.

Tips for a hotter coffee

For hotter coffee, you should:
• perform a rinse cycle, selecting the "Rinsing" function in
the settings menu (page 10).
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the coffee temperature in the settings menu
(page 11).

Making coffee using coffee beans

Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container with coffee beans (fig. 15).
2. Place under the coffee spouts:
- 1 cup, if you want to make 1 coffee (fig. 13);
- 2 cups if you want 2 coffees (fig. 16).
3. Lower the spout as near as possible to the cups (fig. 16).
This makes a creamier coffee.
4. Press the button corresponding to the number of coffees
required (1 cup
5. Preparation begins. The amount of coffee selected is di-
splayed together with a progress bar which gradually fills
as preparation progresses.
Please note:
• While the machine is making coffee, delivery can be inter-
rupted at any moment by pressing any button.
• At the end of delivery and within 3 seconds, press and hold
one of the coffee buttons to increase the quantity of coffee
in the cup ( or
Once the coffee has been made, the appliance is ready to make
the next drink.
12
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards "7".
For fuller bodied coffee with more
'crema' , turn one click anticlockwise to-
wards "1" (do not turn more than one
click at a time otherwise the coffee could
or 2 cups ).
) (fig. 17).