Voice Recognition; Audio System - Cadillac 2010 Escalade ESV Owner's Manual

Voice Recognition

The Bluetooth system uses voice recognition to
interpret voice commands to dial phone numbers and
name tags.
Noise: Keep interior noise levels to a minimum. The
system may not recognize voice commands if there is
too much background noise.
When to Speak: A short tone sounds after the system
responds indicating when it is waiting for a voice
command. Wait until the tone and then speak.
How to Speak: Speak clearly in a calm and natural
voice.

Audio System

When using the in vehicle Bluetooth system, sound
comes through the vehicle's front audio system
speakers and overrides the audio system. Use the
audio system volume knob, during a call, to change the
volume level. The adjusted volume level remains in
memory for later calls. To prevent missed calls, a
minimum volume level is used if the volume is turned
down too low.
Bluetooth Controls
Use the buttons located on the steering wheel to
operate the in vehicle Bluetooth system. See Audio
Steering Wheel Controls on page 4 106 for more
information.
g
(Push To Talk) : Press to answer incoming calls,
to confirm system information, and to start speech
recognition.
x
(Phone On Hook): Press to end a call, reject a
call, or to cancel an operation.
Pairing
A Bluetooth enabled cell phone must be paired to the
in vehicle Bluetooth system first and then connected
to the vehicle before it can be used. See the cell phone
manufacturers user guide for Bluetooth functions
before pairing the cell phone. If a Bluetooth phone is
not connected, calls will be made using OnStar
Hands Free Calling, if available. Refer to the OnStar
owner's guide for more information.
Pairing Information:
Up to five cell phones can be paired to the
in vehicle Bluetooth system.
The pairing process is disabled when the vehicle is
moving.
I n f o r ma t i o n P r o v i d e d b y :
®
4-69