Loading Paper; Loading Paper In Tray 1 - Xerox Phaser 6500 User Manual

Loading Paper

This section includes:
•

Loading Paper in Tray 1

• Loading Paper in the Manual Feed Slot
• Loading Paper in the 250-Sheet Feeder (Tray 2)
Loading Paper in Tray 1
You can use Tray 1 for a wide variety of media, including:
• Plain Paper
• Lightweight Cardstock
• Heavyweight Cardstock
• Letterhead
• Labels
• Envelopes
• Lightweight Glossy Cardstock
• Heavyweight Glossy Cardstock
• Hole Punched
• Colored Paper
• Pre-printed Paper (paper already printed on one side)
• Custom size Paper
For a complete list of paper types and sizes usable in Tray 1, see
Follow these guidelines when loading paper into Tray 1:
• Load up to 250 sheets of plain paper or a stack of paper (65–220 g/m
Cover) less than 15 mm high (0.60 in.).
• Tray 1 accepts paper within the following dimensions:
• Width: 76.2–216 mm (3–8.5 in.)
• Length:127–355.6 mm (5–14 in.)
• For automatic 2-sided printing, you can load paper in the range of 60–105
Bond).
• Do not load different types of paper in the same tray at the same time.
• To print high quality, use high-quality paper intended for laser printers.
• Do not remove or add paper to Tray 1 during printing. Doing so could cause a paper jam. Remove
the paper, align it with the new paper and insert both into the tray together.
• Do not put any objects other than paper on Tray 1.
• Do not push or force down Tray 1.
• Always load paper short-edge feed first.
For more paper usage guidelines, see
Downloaded From ManualsPrinter.com Manuals
on page 51
on page 53
on page 55
Supported Paper and Media
Supported Paper on page 48.
2
, 17–40 lb. Bond, 40–80 lb.
2
(16–28 lb.
g/m
on page 46.
Phaser 6500 Color Laser Printer
User Guide
Printing
51