Subaru 2001 IMPREZA Service Manual page 75

BRAKE
B: INSTALLATION
1) Install in the reverse order of removal.
CAUTION:
• If cable clamp is damaged, replace it with a
new one.
• Never fail to cover outer cable end with boot.
• Be careful not to kink accelerator cable.
• Always use new clevis pins.
2) Adjustment of clutch pedal <Ref. to CL-36, AD-
JUSTMENT, Clutch Pedal.>
3) Inspect after pedal installation <Ref. to BR-76,
INSPECTION, Brake Pedal.>
BRAKE PEDAL
C: DISASSEMBLY
1. LHD 1.6 L MT MODEL
1) Remove the stop light switch.
<Ref. to BR-77, REMOVAL, Stop Light Switch.>
2) Remove nut and pull out the bolt until brake ped-
al is able to remove, then remove brake pedal.
3) Remove bush, spring and stopper.
(1) Stopper
(2) Bushing
(3) Brake pedal
(4) Brake pedal spring
4) Remove the brake pad.
2. LHD 2.0 L MT MODEL
1) Remove the brake switch.
<Ref. to BR-77, REMOVAL, Stop Light Switch.>
2) Remove the clutch pedal.
<Ref. to CL-34, DISASSEMBLY, Clutch Pedal.>
3) Remove the clutch master cylinder bracket.
BR-74
BR0069
BR0070
B4M2349