Subaru 2001 IMPREZA Service Manual page 39

BRAKE
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust parking brake. <Ref. to PB-11, ADJUST-
MENT, Parking Brake Assembly (Rear Disc
Brake).>
REAR DISC ROTOR
C: INSPECTION
1) Set a dial gauge on the disc rotor. Turn disc rotor
to check runout.
CAUTION:
Securely adjust disc rotor to hub.
NOTE:
Make sure that dial gauge is set 5 mm (0.20 in) in-
ward of rotor outer perimeter.
Disc rotor runout limit:
0.075 mm (0.0030 in)
2) Measure disc rotor thickness.
NOTE:
Make sure that micrometer is set 5 mm (0.20 in) in-
ward of rotor outer perimeter.
Disc rotor thickness: A (14inch type)
Standard value
10 mm (0.39 in)
Service limit
8.5 mm (0.335 in)
Disc rotor thickness: A (15inch type)
Standard value
18 mm (0.71 in)
Service limit
16 mm (0.63 in)
BR-38
B4M1771
G4M0383