Cleaning Or Changing The Central Laminar Filter And Motor Protection Filter - Dirt Devil Centrixx TS Operating Manual

Hide thumbs Also See for Centrixx TS:
Table of Contents

Advertisement

Available languages

Available languages

4.2 Cleaning or changing
the central laminar
filter and motor
protection filter.
Fig. 19
Fig. 20
Fig. 21
Fig. 22
1. Switch the appliance off and observe the instructions
under
Chapter 3.2, "Switching off and retracting the
power cord.".
2. Empty the dust container,
dust container".
3. Remove the cover from the dust container by pulling it
off the dust container over a dustbin.
4. Keep holding the cover low over a dustbin. First remove
the filter screen by turning it counter-clockwise off the
cover (Fig. 19).
5. Then twist the central laminar filter off the cover by
turning it counter-clockwise (Fig. 20).
6. For a rough cleaning beat the dirt from both parts by
lightly tapping them from all sides over a dustbin
(Fig. 21).
7. To thoroughly clean the central laminar filter without
water, use the supplied furniture brush as shown
(Fig. 22).
Cleaning and care
Chapter 3.4, "Emptying the
37

Advertisement

Table of Contents
loading

Table of Contents