Table of Contents
Advertisement
Connection to the Switch requires UTP Category 5
network cabling with RJ-45 tips. For more infor-
mation, please see the Cabling Specification in
Note
Appendix A.
Step 5:
Supply power to the Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the power plug of the power cable to a
standard wall outlet.
When the Switch receives power, the Power LED should remain
solid Green.
When need use the 100Base-FX port of FSD-
805SC and FSD-805S15, please changed the DIP
Switch on the left side. The DIP Switch control the
Note
Port 1 runs at TP or Fiber operation mode.
Fiber or TP port choose
13
Advertisement
Table of Contents
