Switching To Telephone Operation - Mercedes-Benz Comand Operator's Manual

Telephone*
Telephone operation
Entering the PUK
If you enter your PIN incorrectly three
times in a row, you need to enter the PUK
number.
i
The PUK number is provided by your
telephone service provider.
The PUK can only be entered at the mobile
phone. Refer to the mobile phone
operator's manual.
96

Switching to telephone operation

When the COMAND is switched on, you
can switch to telephone operation from
any other system (e.g. radio):
Press a.
The Telephone menu will appear.
The telephone is ready for operation
Message Ready and the reception
strength Ö are shown on the status bar.
Other messages
ROAMING
The telephone is using a non home type
system
no Serv.
The telephone is not logged into a net-
work
Fault messages:
Telephone Not Inserted
Plug the mobile phone into the mobile
phone cradle*. Refer to the separate
mobile phone operator's manual.
Telephone Not Installed
Your vehicle may not have a mobile phone
cradle* installed and/or the telephone
control unit may not be coded properly.
Contact an authorized Mercedes-Benz
Center.