Selecting A Detour - Mercedes-Benz Comand Operator's Manual

Navigation
During route guidance
Deleting the active via route
Press g to select option
Delete
.
Active Via
Press E.
The system deletes the via route and
recalculates the route to the
destination.
142
Changing the active via route
Press g to select option
Change
.
Active Via
Press E.
The list for selecting another via route
appears.
Use G or g to select the desired via
route.
Press E.
The system recalculates the route.

Selecting a detour

The detour function blocks a route section
ahead. If possible, the system will
calculate a detour. You can adjust the
length of the route section to be blocked.
i
If the system does not allow you to
block a route section, the message
is displayed.
Detour Possible
Traffic jams are identified by the driver,
not by the COMAND.
Switching on
Activate the soft key display
( page 139).
Press the soft key.
Detour
i
If you have already placed a block on a
route section, appears written
Detour
in black. A menu will appear instead of
the map ( page 143).
No