Switching Telephone Operation On - Mercedes-Benz Comand Operator's Manual

Telephone*
Telephone operation

Switching telephone operation on

1
2
1 Status line, telephone is not yet logged
onto network
2 Input line for unlock code
Press a.
The menu to enter the unlock code will
appear.
Entering the unlock code
Use the number keys 1 through 0 to
enter the unlock code.
96
Asterisks instead of digits will appear in
the input line.
If entered code is correct and the pho-
ne is registered in a network, the phone
is ready for use.
i
Your unlock code prevents unauthori-
zed persons from using your telephone.
Be sure to memorize this code, a three
digit number, carefully.
Timeport phones use a three-digit code.
V60 phones use a four-digit code. The
P82.85-9121-31
head unit will unlock the phone using
the first three digits of the four-digit V60
unlock code.
If you enter an incorrect code, the sys-
tem returns to the menu for entering the
unlock code.
i
You must always enter the unlock code
when you switch on the telephone the
first time (if phone is in locked mode).
3
Ready for operation display
3 Telephone is ready for operation,
"Send" is highlighted
4 Reception strength, indicated by up to
5 bars
RM appears, if the telephone is not
using the home system
4
P82.85-9122-31