Memory Functions - Mercedes-Benz Comand Operator's Manual

Memory functions

i
There are 10 presets available.
You can use the following functions:
Saving stations manually
Selecting a station from the Satellite
preset memory ( page 84)
Selecting a station by entering the
channel number ( page 82)
Saving station manually
In the Satellite radio main menu
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings ( page 199).
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap-
pear in the status line, e.g.
SAT2
Satellite radio*
Satellite radio operation
On the memory list
In the Satellite radio main menu, press
the soft key.
Presets
The SAT preset memory will appear.
Use G or g to select a memory pre-
set.
Press E longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings ( page 199).
The satellite radio saves the current
.
station at the memory preset selected.
i
An existing entry is overwritten in the
memory list when a new input is given.
You will see the Satellite radio main menu
automatically after 8 seconds
if you press s.
83