Mercedes-Benz Comand Operator's Manual page 134

Entering a street
The system will display one of the following
menus after you have entered the city:
In the case of cities with more than 15
streets: Enter Street menu
( page 125).
In the case of cities with up to 15
streets: Select Street menu
( page 126)
If no streets are available for the
destination: Select CityCtr list
( page 124)
The respective menu is indicated on the
status bar.
In addition to the street selection, you can
use the following soft keys to determine
your destination:
soft key:
Map
Brings you to the destination input
directly above the map ( page 131).
soft key:
CityCtr
Brings you to the district (center)
selection ( page 124).
soft key:
POIs
Brings you to the Points of Interest
selection menu ( page 155).
Press h, H, g and G to select
the characters. After each selection,
press E.
Press F and f to select characters
diagonally.
or
Press one of the number keys 2 to
9 as often as needed.
Navigation
Destination input
i
For quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the streets stored on the
navigation DVD. The character
selected appears magnified. The
system will accept the entry if the input
matches the name of a street stored on
the navigation DVD.
Press the soft key if
Delete
necessary.
The character last entered or the
character last accepted by the system
is deleted.
i
Do not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).
125