Navigation Displays - Mercedes-Benz Comand Operator's Manual

Muting current voice instructions
Press J.
The current announcement is stopped.
You will hear the next navigation
announcement normally.
Switching voice instructions On/Off
Switching off
During a navigation announcement
press J for 2 seconds.
The message
Voice Announcements
will appear briefly.
Muted
Further route guidance takes place
using only the symbols in the display.
If a new route guidance cycle is started,
the announcements are automatically
switched on again.
Switching on again
Press j.

Navigation displays

The navigation displays are only visible
while route guidance is active.
To switch to the navigation display from
another display, e.g. from CD operation:
Press b or c.
Two examples are shown below:
Display example 1:
Navigation
Route guidance
The road you are currently driving on is
shown on the status bar, in this case
The indication is the distance to
120 mi
the next driving maneuver.
If the GPS position display ( page 149) is
active, the GPS data are shown instead of
the street name.
i
Using the control system, the display
unit can be changed between km or
miles (see your vehicle's Operator's
Manual).
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).
When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).
.
I-90
135