Fiat 500x 2016 User Manual page 65

Instrument Cluster Display
ParkSense is displayed on the instrument cluster only if you have selected the item
"sound and display" inside the "Settings" menu of the Uconnect system.
If an obstacle is detected in the center rear region, the display will show a single solid arc
in the center rear region and will produce a one-half second tone. As the vehicle moves
closer to the obstacle, the display will show the single arc moving closer to the vehicle
and the sound tone will change from slow, to fast, to continuous.
If an obstacle is detected in the left and/or right rear region, the display will show a single
flashing arc in the left and/or right rear region and will produce a fast sound tone. As the
vehicle moves closer to the obstacle, the display will show the single arc moving closer to
the vehicle and the tone will change from fast to continuous.
In general, the car is closest to the obstacle when the display shows only a flashing arc
and the chime becomes continuous.
The color on the display depends on the distance and location of the obstacle.
Enabling And Disabling ParkSense
ParkSense can be enabled and disabled with the ParkSense switch.
When the ParkSense switch is pushed to disable the system, the instrument cluster will
display the "PARKSENSE OFF" message for approximately five seconds. Refer to "Elec-
tronic Vehicle Information Center (EVIC)" in "Getting To Know Your Instrument Panel" in
your owner' s manual on the DVD for further information. When the shift lever is moved
to REVERSE and the system is disabled, the EVIC will display the "PARKSENSE OFF"
message for as long as the vehicle is in REVERSE.
The ParkSense switch LED will be ON when ParkSense is disabled or requires service.
The ParkSense switch LED will be OFF when the system is enabled. If the ParkSense
switch is pushed, and requires service, the ParkSense switch LED will blink momentarily,
and then the LED will be ON.
ParkSense will remember the previous state when the vehicle is switch off.
After turning off the ignition, the ParkSense remains in this setting until the next key
cycle, even in the case of changing the setting of starting MAR/RUN to STOP/OFF and
then again in MAR/RUN.
OPERATING YOUR VEHICLE
CAUTION!
63