Fiat 500x 2016 User Manual page 16

GETTING STARTED
Lock Or Unlock The Liftgate
To Lock The Liftgate
With a valid Passive Entry RKE transmitter
within 5 ft (1.5 m) of the liftgate, push
Passive Entry LOCK button located to the
right of Passive Entry liftgate unlock/release
button.
To Unlock/Enter The Liftgate
The liftgate passive entry unlock feature is
built into the electronic liftgate handle.
With a valid passive entry RKE transmitter
within 5 ft (1.5 m) of the liftgate, push the
Passive Entry liftgate unlock/release button
(2) and pull to open the liftgate.
NOTE:
Refer to "Doors" in "Getting To Know Your
Vehicle" in your Owner's Manual on the
DVD for further information.
ENGINE STARTING/STOPPING
Starting
1. With a valid Keyless Enter-N-Go Key
Fob inside the vehicle.
2. Place the shift lever in PARK or
NEUTRAL.
3. While pushing the brake pedal, push the
ENGINE START/STOP button once. If
the engine fails to start, the starter will
disengage automatically after 10 seconds.
4. To stop the cranking of the engine prior
to the engine starting, push the button
again.
NOTE:
In case the ignition switch does not change
with the push of a button, the RKE transmitter (Key Fob) may have a low or dead bat-
tery. In this situation, a back up method can be used to operate the ignition switch. Put
the nose side of the Key Fob against the ENGINE START/STOP button and push to op-
erate the ignition switch.
14
Passive Entry Release Button
Passive Entry Liftgate Release Button
Engine Start/Stop Button