Softkey" Module: Custom Soft Key Settings; Setting - VTech VCS754 Administrator And Provisioning Manual

"softkey" Module: Custom Soft Key Settings

The custom soft key settings allow you to select which soft keys can appear on the Idle
screen, the Call Active screen, the Call Held screen and the Live Dial screen. You can also
specify the position of each soft key. Softkeys appear on the VCS754 screen in the same
order as the softkey values you enter. Enter soft key values separated by commas. For
more information, see
nine soft keys (three levels) for each parameter.
The soft key parameters follow the format softkey.[element].

Setting:

Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VCS754 Administrator and Provisioning Manual
"Customizing Soft Keys" on page
softkey.idle
Specifies the soft keys visible on the idle screen.
blank, dir, call_log, redial,
message, dnd, cfwd, cfna,
cfwd_all, cfwd_busy,
intercom, retrieve, callback,
grp_pickup, dir_pickup, line,
settings, pc_spk
softkey.call_active
Specifies the soft keys visible on the active call screen.
blank, new, park_call, end,
hold, transfer, conf, xferline,
confline
softkey.call_held
Specifies the soft keys visible on the held call screen.
blank, new, park_call,
retrieve, grp_pickup,
dir_pickup, end, resume,
transfer, conf, xferline,
confline
softkey.live_dial
Specifies the soft keys visible on the live dial screen.
blank, dir, call_log, redial,
message, end, dial, input,
cancel, backspc
128
14. You can specify a maximum of
Default: redial,line,pc_spk,call_log,
blank,dir
Default: end,transfer,conf,xferline,
confline
Default: end,new,resume,transfer,
conf,xferline,confline
Default: backspc,input,dial
Back to Contents