Key Tone; Dial Mode; Area Code - VTech VCS704 User Manual

Settings

Key tone

You can turn the key tone on or off for the base unit. If the key tone is on, the base unit beeps
with each key press. If the key tone is off, there are no beeps when you press the keys.
1. Press when the base unit is not in use.
until the base unit displays Settings
2. Press or
until the base unit displays Key tone, and then press
3. Press or
The base unit displays KEY TONE with the current setting.
4.
to sample each key tone (Off, or 1 to 3).
Press or
5. Press to save your selection. You hear a conirmation tone.

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must
change the dial mode to pulse dialing before using the base unit to make a call.
1. Press when the base unit is not in use.
until the base unit displays Settings, and then press
2. Press or
until the base unit displays Dial mode, and then press
3. Press or
to choose Touch-tone or Pulse.
4. Press or
5. Press to save your selection. You hear a conirmation tone.
You can press

Area code

If you dial local calls using only seven digits (area code not required), you can program
your home area code so that when you receive a call within your local area, the
telephone number is automatically stored in the call log without the area code.
1. Press when the base unit is not in use.
until the base unit displays Settings, and then press
2. Press or
until the base unit displays Area code, and then press
3. Press or
base unit briely displays Only for 7digit dial from CID, followed by AREA CODE:
4. Use the dialing keys to enter the 3-digit area code.
• Press or
• Press
• Press and hold
5. Press to save your selection. You hear a conirmation tone.
to switch to tone dialing temporarily when using pulse service while on a call.
to move the cursor to the left or right.
to erase a digit.
to erase all digits.
, and then press
17
.
.
.
.
.
. The