Settings
Key tone
You can turn the key tone on or off for the base unit. If the key tone is on, the base unit beeps
with each key press. If the key tone is off, there are no beeps when you press the keys.
1.
Press
when the base unit is not in use.
2.
Press
or
until the base unit displays Settings
until the base unit displays Key tone, and then press
3.
Press
or
The base unit displays KEY TONE with the current setting.
4.
to sample each key tone (Off, or 1 to 3).
Press
or
5.
Press
to save your selection. You hear a confirmation tone.
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must
change the dial mode to pulse dialing before using the base unit to make a call.
1.
Press
when the base unit is not in use.
until the base unit displays Settings, and then press
2.
Press
or
until the base unit displays Dial mode, and then press
3.
Press
or
to choose Touch-tone or Pulse.
4.
Press
or
5.
Press
to save your selection. You hear a confirmation tone.
You can press
Area code
If you dial local calls using only seven digits (area code not required), you can program
your home area code so that when you receive a call within your local area, the
telephone number is automatically stored in the call log without the area code.
1.
Press
when the base unit is not in use.
until the base unit displays Settings, and then press
2.
Press
or
3.
Press
or
until the base unit displays Area code, and then press
base unit briefly displays Only for 7digit dial from CID, followed by AREA CODE:
4.
Use the dialing keys to enter the 3-digit area code.
•
Press
or
•
Press
•
Press and hold
5. Press
to save your selection. You hear a confirmation tone.
to switch to tone dialing temporarily when using pulse service while on a call.
to move the cursor to the left or right.
to erase a digit.
to erase all digits.
and then press
,
17
.
.
.
.
.
. The