Renault Espace Technical Note page 53

REFITTING
Offer up the hydraulic distributor and reconnect
the solenoid valve connectors.
Refit the hydraulic distributor mounting bolts as
indicated below:
• Fit:
- the distributor prealigning it using bolts
(4) and (5),
- the other bolts.
• Tighten the bolts to a torque of 0.75 daN.m in
the order 1 - 2 - 3 - 4 - 5 - 6 - 7.
SETTING THE PLUNGER SHAFT
Retain the multifunction switch in the extreme
st
position (1 imposed) using a plastic clip and a
bolt in the mechanical section housing.
Remove bolt ( C ).
AUTOMATIC TRANSMISSION
Hydraulic distributor
13789R
Position the plunger shaft by placing the roller (A)
in the hollow of sector (B) corresponding to 1
posed.
PRN2318
Fit tool B.Vi. 1462 in place of bolt (C). Screw in the
tool fully while retaining the plunger shaft.
Tighten bolt (D) to the specified torque.
Remove the tool, refit bolt (C) and tighten it to
the specified torque.
Apply command G80** using the XR25 if the hy-
draulic distributor is changed to reset the auto-
adaptive patterns to zero and command G74* to
reset the oil age counter to zero (enter the date of
draining day/month/year).
23-9
23
13788R
st im-