Renault Espace Technical Note page 39

Make a mark (C) on the inlet
camshaft phase shifter crown
wheel and the exhaust pulley
in relation to the camshaft
bearing cap housing.
TOP AND FRONT OF ENGINE
Timing belt
Remove camshaft setting tool Mot. 1496 and Top
Dead Centre pin Mot. 1054.
Carry out the angular tightening of the crankshaft
pulley bolt to 115°
engine flywheel using a large screwdriver.
15°, while immobilising the
±
11-30
11
15815-8R
15303S