Faq - TP-Link Archer C2600 User Manual

FAQ

Q1. What can I do if I forgot my wireless password?
The default password is labeled at the back of the router. If the password has been
altered, please connect the router to the computer using a cable and follow the steps
below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >Basic
down your new password for future use.
Q2. How to retrieve the username and password of the web management
page?
The default username and password of the web management page are
case). If the password has been altered, please follow the steps below:
If you have altered the login username and password, and Password Recovery is
enabled:
Note: Ensure the Internet access is available before using this method.
1. Visit http://tplinkwifi.net;
2. Click Forget password
you set when enabling Password Recovery;
3. Login to your mailbox to copy the verification code;
4. Paste the verification code on the window which pops up in Step 2;
5. Click Confirm (the login username and password will be reset as
click);
6. Enter admin (in lower case) as both username and password to login.
Tips: Please refer to 12. 6. Password Recovery
If you have altered the username and password but Password Recovery is disabled:
1. Reset the router to factory default settings: Press and hold the Reset button for at
least 10 seconds and then release;
2. Visit http://tplinkwifi.net;
3. Enter admin (in lower case) as both username and password to login.
Note: You'll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your
new password for future use.
Q3. I cannot login to the router's web management page, what can I do?
This can happen for a variety of reasons, please try the methods below and try again.
> Wireless, locate the password on the loading page, and mark
> Send Code, the verification code will be sent to the mailbox
to learn how to configure Password Recovery.
admin (in lower
admin after the
92