TP-Link Archer C2600 User Manual page 100

4. Disable DHCP:
Network
1 ) Go to
2 ) Deselect Enable DHCP Server;
3 ) Click Save.
Now you can login to the web management page, click
to check the WDS status. When the WDS status is Run, it means WDS bridging is
successfully built.
Q5. I cannot access the Internet even though the configuration is
finished, what can I do?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
As the follow picture shows, if IP Address is a valid IP address, please try the methods
below and try again:
DHCP Server;
>
> Status to check Internet status:
Advanced > Status > Wireless
96