Setting Up An Ipv6 Internet Connection - TP-Link Archer C2600 User Manual
Wireless dual band gigabit router
Hide thumbs
Also See for Archer C2600:
- User manual (113 pages) ,
- Quick installation manual (2 pages) ,
- User manual (95 pages)
Table of Contents
Advertisement
Chapter 4
Set Up Internet Connections
3. If you still cannot connect to the Internet, refer to
FAQ
for further instructions.
4. 3.
Setting Up an IPv6 Internet Connection
Your ISP provides information about one of the following Internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
1. Visit http://tplinkwifi.net, then log in with the password you set for the router.
2. Go to
Advanced
>
IPv6
to log into the configuration page.
3. Select the Internet connection type provided by ISP.
Tips:
If you do not know what your Internet connection type is, contact your ISP or judge according to already known
information provided by your ISP.
4. Fill in information as required by different connection type. (Red blanks must be
filled.)
1 )
Static IP:
Fill in blanks and click Save.
23
Advertisement
Table of Contents
