Chapter 11
How can
I do that?
LAN: 192.168.0.1
1. Change the router's LAN IP addresses to two different IP
addresses on the same subnet. Disable Router 2's DHCP
function.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to
Network
>
Advanced
4. Click
Add
to add a new static routing entry.
5. Finish the settings according to the following explanations:
Network Destination:
to assign to a static route. This IP address cannot be on the same
subnet with the WAN IP or LAN IP of the router. In the example,
the IP address of the company network is the destination IP
Customize Your Network Settings
Router 1
Router 2
LAN: 192.168.0.2
Router 3
PC 2
192.168.0.100
Routing.
The destination IP address that you want
PC 1
WAN: 172.30.30.100
172.30.30.1
72