Table of Contents
Advertisement
5.
After the EW-7288APC is connected to a 5GHz Wi-Fi
network, please reconnect your Wi-Fi device(s) to the
EW-7288APC's new SSID to browse the Internet.
6.
To use the EW-7288APC as a wireless bridge for a wired network device,
simply connect the EW-7288APC to your network device's Ethernet port.
VI. Browser Based Configuration Interface
After setup you can access the browser based configuration interface to
configure or change the settings of the EW-7288APC.
Enter http://edimax**.setup into the URL bar of a web browser on a network
device which is connected to the EW-7288APC.
** are the last two characters of the EW-7288APC's MAC address.
The MAC address and full URL are displayed on the label on the
bottom of the EW-7288APC and the included access key card.
If you can not access edimax**.setup, connect the EW-7288APC to
a computer using an Ethernet cable and try again.
You will be prompted for a username and password. The default username is
"admin" and the default password is "1234". For more information, refer to
the user manual.
8
Advertisement
Table of Contents
