Comfort Adjustments; Tiller Angle Adjustment; Mirror Position; Seatback Adjustment - Pride Mobility Apex Spirit Owner's Manual

NOTE: In order to fully lower the tiller for purposes of disassembly or transport, you must first completely
remove the seat, battery cover and battery.

MIRROR POSITION

To install the mirror (see figure 13):
1. Determine on which side to install the mirror and
remove the rubber plug from the top of the tiller
handle.
2. Insert the threaded end of the mirror holder into
the opening and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure
the mirror in place.
To adjust the mirror:
1. Position yourself in a seated driving position
facing forward.
2. Adjust the mirror left, right, up, or down until you
have a good line of sight behind you.

SEATBACK ADJUSTMENT

WARNING!
scooter with the seatback in a
reclined position.
WARNING! Always keep your back
pressed firmly against the seatback
while adjusting the angle.
To adjust your scooter's reclining seat, perform these
steps. See figure 14.
1. With your back pressed up against the seatback,
lift up on the seatback adjustment lever and lean
forward or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the
seat is in a comfortable riding position.
30
(Apex Spirit Plus)
Do not operate your
12.
NUT
Figure 13. Mirror Installation and Positioning
Figure 14. Seatback Adjustment
TILLER
ADJUSTMENT
KNOB
2
MIRROR HOLDER
RUBBER PLUG
SEATBACK
ADJUSTMENT
LEVER
Apex Spirit