Chapter 13. Barcode Reading; Outline; Enable Reading - Denso BHT-700-CE Reference Manual

Chapter 13. Barcode Reading

13.1. Outline

13.1.1. Enable Reading

BHT-700B
The BHT_EnableBar function enables the barcode device to read barcodes. In this function, you may
specify the following barcode types available in the BHT. The BHT can handle one of them or their
combination.
Available Barcode Type
Universal product codes
EAN-13 (*1) (JAN-13 (*1))
EAN-8 (JAN-8)
UPC-A (*1), UPC-E
Interleaved 2of5 (ITF)
Standard 2of5 (STF)
Codabar (NW-7)
Code 39
Code 93
Code 128 (EAN-128) (*2)
Interleaved 2of5 (ITF)
RSS
(*1) Reading wide bars
EAN-13 and UPC-A barcodes may be wider than the readable area of the barcode reading window.
Such wider bars can be read by long-distance scanning. Pull the barcode reading window away from
the barcode so that the entire barcode comes into the illumination range.
(*2) Specifying Code 128 makes it possible to read not only Code 128 but also EAN-128.
Default Setting
No national flag specified.
No length of read data specified.
No check digit.
No length of read data specified.
No check digit.
Short format of the start/stop characters supported.
No length of read data specified.
No check digit.
No start/stop character.
No length of read data specified.
No check digit.
No length of read data specified.
No length of read data specified.
No length of read data specified.
No check digit.
Nothing specified.
38