Table of Contents
Advertisement
6.3. Shift Key Operation Mode
The shift key operation mode works as follows:
Shift key operation
mode
Non-lock mode
Onetime lock
mode
6.4. Magic Key Control
The table below lists the virtual key codes and character codes when magic keys (M1 to M3) are pressed.
Parameter value
MAGIC_FUNC_NONE
MAGIC_FUNC_ENTER
MAGIC_FUNC_TRG
MAGIC_FUNC_SHIFT
MAGIC_FUNC_CTRL
MAGIC_FUNC_ALT
MAGIC_FUNC_BLT
MAGIC_FUNC_TAB
MAGIC_FUNC_LASER
MAGIC_FUNC_CLEAR
MAGIC_FUNC_USERDEF
(*1) Returns the same virtual key code as when "MAGIC_FUNC_NONE" is assigned.
(*2) Notified virtual key codes are user-defined codes. In such a case, functions assigned to keys such as
the following cannot be executed.
- Changing the entry mode by pressing the [AL] key to which the function has been assigned.
- Backing up the registry by pressing the [SF] key to which the function has been assigned and the
[Power] key.
- Switching between backlight enable and backlight disable by assigning the function to [SF] + [M3].
- The keypad is shifted when the Shift key is held down.
- The shift status is cleared immediately after releasing a key when in the
shift status from the time the key is pressed until it is released while the
shift key is held down and after it is released.
Virtual key code
Constant
[M1] key
[M2] key
[M3] key
VK_RETURN
(*1)
VK_SHIFT
VK_CONTROL
VK_MENU
(*1)
VK_TAB
(*1)
VK_CLEAR
(*2)
Description
Value
VK_M1
C1
VK_M2
C2
VK_M3
C3
0D
10
11
12
09
0C
15
Character code
When not shifted
-
-
-
0D(CR)
-
-
-
-
-
09 (tab)
-
-
Shifted
-
-
-
0D(CR)
-
-
-
-
-
09 (tab)
-
-
Advertisement
Table of Contents
