Table of Contents
Advertisement
6.6.4. Alphabet Entry Mode 2 (27-key pad only)
Alphabet entry mode 2 starts by:
(1) calling the BHT_SetSysSettingDW (BHT_KEY_INPUT_METHOD, INPUT_METHOD_ALPHABET2)
function.
(2) pressing the [AL] key when in alphabet entry mode 1. (*1)
Alphabet entry mode 2 terminates by:
(1) switching to any other entry mode with the BHT_SetSysSettingDW (BHT_KEY_INPUT_METHOD,
INPUT_METHOD_XXXXXX) function.
(2) pressing the [AL] key. (*1)
(*1) Effective only when the key entry mode transition key is not disabled.
Similarly to alphabet entry mode 1, alphabet letters can also be entered in alphabet entry mode 2 using
the same method used when entering alphabet letters with a cellular phone.
(1) The following icon below displays in the task bar when starting alphabet entry mode 2.
The unestablished character display window does not display.
(2) If keys [0] to [9] or the [.] key is pressed, characters assigned to those keys display at the current
cursor position. By pressing the same key(s) again, assigned characters display sequentially.
Press a different key to establish the entered character(s).
(3) Keys used in alphabet entry mode 2
The table below lists keys whose operations are different from those in the numeric entry mode.
Use this key
[0] to [9] and
period (.) keys
[AL] key
Used to enter alphabet letters. For details of alphabet letters assigned to these
keys, refer to "Appendix A. Keyboard Arrangement, Virtual Key Codes and
Character Codes" – "A.1.3. Character Codes in Alphabet Entry Mode."
Switches to numeric entry mode.
To do this
19
Advertisement
Table of Contents
